4 in stock
Mortise Lock Box by Penn
Antique interior mortise lock box by Penn. Brassed face. The lock box measures 3 1/8″l x3 3/4″h x 1/2″d. Face plate measures 5 3/8″h x 7/8″w. Marked 2327 on inside of box.
We clean, oil and test all of our lock boxes to make sure that they are fully functional.
Please let us know if you are needing a key or strike plate to go with your lock box when ordering. We can find a key and strike plate that work with most of our lock boxes. Skeleton keys are available for $5ea and most basic (steel) strike plates are $7ea. It is a good idea to order these when ordering the lock box so that we can test them together and make sure that everything works together properly. The only way to know that a key works is to test it on the lock box.
This is an antique item and may show wear due to age. This may include scratches, pitting, patina, finish loss, rust or other general wear. We attempt to include any significant damage beyond regular wear within the description. We make every effort to clean as much paint, dirt and rust off of items while still leaving as much of the original patina as possible. Photos shown are of actual item you will receive. If multiples are ordered, additional photos will be sent for approval.
This item may be shippable.
Find more lock box options at the link here: https://www.saveinflorence.com/product-category/antique-hardware/lock-boxes/
What if the latch faces the wrong direction?
Most lock boxes can be flipped to work for both right open and left open doors, so don’t worry about which way the latch goes- it can be changed! Simply open the box cover with the screw on the front of the box part. Carefully remove the cover (things are under tension, so no quick movements!). I recommend taking a photo of the inside once it is open just in case anything shifts. Take the latch piece out, flip it around and replace in the same position. Make sure it still makes proper contact with the round piece that the doorknob twists. Replace cover, and you are good to go.